Jerome J605 Hydrogen Sulfide Detector

The newest instrument from AZI is the Jerome® J605 Hydrogen Sulfide Analyzer. The Jerome® J605 can read as low as 3 ppb with an incredible resolution to 20ppt.
The J605 is housed in a light and ergonomically designed case, setting a new precedence for low-level, portable monitors. The Industry-proven, gold film sensor has been upgraded and improved from previous models, resulting in longer life expectancies. The Jerome® J605 is more sensitive then the Jerome 631-X.

SKU: 0230.04.05 Categories: , Tag:

Additional Information

  • No PC Software Required
  • 20,000 Data Points | On-Board Data Logging
  • Stores Date, Time, and Locations
  • USB Interface for Data Transfer
  • Battery Powered Sensor Regeneration | 18 Hour Battery Life
  • Detection H2S Levels as Low as 3 ppb
  • EPA & ATSDR Accept Jerome® findings for cleanup
  • SCADA interface capabilities via 4-20ma
  • Functional Test Module (FTM) verifies instrument functions correctly between recommended annual factory calibrations
  • Agricultural Applications
  • Ambient Air Analysis
  • Applied Research
  • Control Room Corrosion Monitoring
  • Hydrogen Sulfide Source Detection
  • Landfills
  • Leak Detection
  • Quality Control
  • Regulatory Compliance and Permitting
  • Scrubber Efficiency Testing

Resolution: 20 ppt (0.02 ppb) in Range 0
Detection Range: 3 ppb (0.003 ppm) – 10 ppm
Accuracy/Precision: Range 0: +/- 1 ppb at 5 ppb/10% RSD, Range 0: +/- 3 ppb at 50 ppb/5% RSD, Range 1: +/- 0.03 ppm at 0.5 ppm/5% RSD, Range 2: +/-0.3 ppm at 5.0 ppm/5% RSD
Response Time: 12 to 52 Seconds
Power Requirements: 12 VDC for the instrument (provided by the internal battery, AC power supply/charger, external batttery pack or car accessory cable)

You may also like…