- Samples particulates, vapors, gases, and metal fumes
- Works with all common sampling media
- Multi-language capability: English, Spanish, French, Italian, Dutch, Portuguese and German
- Outlet port for bag sampling
The GilAir® Plus features wide dynamic flow and pressure ranges to address all personal air sampling methods with flow ranges between 20 and 5,000 cc/min. With patent pending QuadModeSM air sampling technology, the GilAir Plus can perform both high-flow constant pressure and constant flow (450-5,000 cc/min) and low-flow constant pressure and constant flow (20-499 cc/min) with a single pump without external adaptors. It’s like getting two pumps in one.
GilAir Plus is a smart air sampling pump that provides ambient or standard temperature and pressure corrected display (STP model) and data-logging for up to 16 sampling events (STP and Datalog model). The pump has high back pressure capability of up to 40″ H2O in high flow and up to 25″ H2O in low flow. An automatic self check system ensures sample accuracy. In the event of a fault condition, the pump’s selectable automatic fault recovery feature attempts to restart the pump up to 10 times every 3 minutes to determine if the fault condition has been cleared.
Other configurations and options available. Please contact your local Eco-Rental Solutions representative for assistance.
Flow Range Constant flow 20 – 5,000 cc/min. without external adaptors Constant pressure 1 – 5,000 cc/min without external adaptors
Flow Modes Constant Flow or High and Low Flow Constant Pressure
Flow Display ± 5% or 3 cc/min of set flow, whichever is larger
Constant Flow Control ± 5% or 3 cc/min of set flow, whichever is larger
Constant Pressure Control ± 10% of back-pressure
Back Pressure Capability
(8-hour runtime) 5000 cc/min. up to 12” H20 back pressure
4000 cc/min. up to 20” H20 back pressure
3000 cc/min. up to 30” H20 back pressure
2000 cc/min. up to 30” H20 back pressure
1000 cc/min. up to 35” H20 back pressure
450 – 1000 cc/min. up to 40”” H20 back pressure
20 – 449 cc/min. up to 25” H20 back pressure
Run Time 8 hour minimum
Flow Fault If flow changes exceed 5% within back pressure specifications, fault notification appears. If fault exceeds 30 seconds, pump shuts down. Selectable automatic fault recovery allows the pump to attempt restart every 3 minutes for up to 10 times or to hold until manual intervention