Dwyer 2000-0 Magnehelic Gage
Indicates positive, negative, or differential pressure.
Additional Information
Service: Air and non-combustible, compatible gases. (Natural Gas option available.)
Wetted Materials: Consult factory. Housing: Die cast aluminum case and bezel, with acrylic cover. (MP model has polycarbonate cover). Accuracy: ±2% of full scale (±3% on – 0, -100 Pa, – 125 Pa, 10MM and ±4% on -00, – 00N, -60 Pa, – 6MM ranges), throughout range at 70°F (21.1°C).
Pressure Limits: -20˝ Hg to 15 psig.† (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar), HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gages only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gages which require an elastomer other than silicone for the diaphragm.
Temperature Limits: 20 to 140°F (-6.67 to 60°C). *Low temperature models available as special option.
Size: 4˝ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8˝ female NPT duplicate high and low pressure taps – one pair side and one pair back.
Weight: 1 lb 2 oz (510 g), MP & HP 2 lb 2 oz (963 g).
The Series 2000 is not field serviceable and should be returned if repair is needed (field repair should not be attempted and may void warranty). Be sure to include a brief description of the problem plus any relevant application notes. Contact customer service to receive a return goods authorization number before shipping.