RKI Eagle 2 Five Gas Monitor
RKI is proud to offer the next generation of our popular EAGLE portable gas detector. Equipped with features that are not available on competitive units, the EAGLE 2 is a powerful instrument that does more than just offer the standard confined space protection for LEL, O2, H2S and CO.
The EAGLE 2 available features include a % volume capability for CH4 and H2 using a TC (thermal conductivity) sensor; ppm or LEL hydrocarbon detection at the push of a button; infrared sensors for CO2 (ppm or % volume), methane or hydrocarbons in LEL and % volume ranges;
Optional LEL / ppm H2 specific sensor, methane elimination feature for environmental applications; and a variety of super toxic gases.
Additional Information
- Monitor up to 6 different gases
- PPM, % LEL, or % Vol. auto-ranging combustible detection
- Specialty Sensors
- PID (Photoionization Detector)
Low or high range for VOC detection
Fence Electrode Technology for humidity and contamination resistance
- PID (Photoionization Detector)
Infrared (IR) CO2, % LEL CH4, % Vol. CH4, % LEL HC, % Vol. HC
Thermal Conductivity (TC) % Vol. H2, % Vol. CH4
Smart toxic, plug and play sensors NH3, AsH3, Cl2, HCN, PH3, & SO2
Hydrogen specific LEL / ppm sensor
- Powerful long-life pump up to 125’ range
- Low flow pump shut off and alarm
- Methane elimination for environmental use
- Alkaline 18 hours or NiMH 20 hours capability
- EPA Method 21 VOC Monitoring
- Internal hydrophobic dust filter
- External probe with hydrophobic filter
- Multilingual (5 languages)
- Ergonomic RFI / EMI / chemical / weather resistant enclosure
- Intrinsically safe design, CSA approval
- Datalogging standard
Enclosure | Weatherproof, chemical resistant, RFI / EMI coated high impact polycarbonate-PBT blend. Can operate in 2.0” of water without leakage. Ergonomically balanced with rugged top mounted handle. Water & dust resistant equivalent to IP64. |
Dimensions | 9.5” L x 5.25” W x 5.875” H |
Weight | 3.8 Lbs (standard 4 gas with batteries). |
Detection Principle | Catalytic combustion, electrochemical cell, galvanic cell, infrared, Photoionization detector, and thermal conductivity. |
Sampling Method | Powerful, long-life internal pump (over 6,000 hours) can draw samples over 125 feet. Flow rate approximately 2.0 SCFH. |
Display | 3 display modes: display all gases, large font-autoscroll, or large font-manual scroll. Polyurethane protected overlay. Backlight, illuminates for alarms and by demand, with adjustable time. |
Language | Readout can display in 5 languages (English, French, German, Italian, or Spanish). |
Alarms | 2 Alarms per channel plus TWA and STEL alarms for toxics. The two alarms are fully adjustable for levels, latching or self reset, and silenceable. |
Alarm Method | Buzzer 95 dB at 30 cm, four high intensity LED’s. |
Controls | 4 External glove friendly push buttons for operation, demand zero, and autocalibration. Buttons also access LEL/ppm, alarm silence, peak hold, TWA/STEL values, battery status, conversion factors, and many other features. |
Continuous Operation | At 70°F, 18 hours using alkaline batteries, or 20 hours using NiMH. |
Power Source | 4 alkaline or NiMH, size C batteries (Charger has alkaline recognition to prevent battery damage if charging is attempted with alkalines). |
Operating Temp. & Humidity | -20°C to 50°C (-4°F to 122°F), 0 to 95% RH, non-condensing. |
Environmental | IP-64 |
Response Time | 30 Seconds to 90% (for most gases) using standard 5 ft hose. |
Safety Rating | Intrinsically Safe, Class I, Groups A, B, C, D. Approvals: CSA / CE |
Standard Accessories | Shoulder strap, alkaline batteries, hydrophobic probe, and 5 foot hose, internal hydrophobic filter. |
Optional Accessories | • Dilution fitting (50/50) • NiMH batteries • Battery charger, 115 VAC, 220 VAC, or 12 VDC (charge time 4 hours) • Continuous operation adapter, 115 VAC or 12 VDC • Extension hoses • IRDA cable for datalogging download |
Warranty | Two year material and workmanship, one year for PID sensor. |