Sale!
CEL-350 Personal Noise Dosimeter

Buy CEL-350 dBadge | Eco Rental Solutions

$1,595.00 $1,435.50

The CEL-350 is a completely new interpretation of the classic noise dosimeter. It has all the advantages of earlier badge designs such as small size and light weight and yet it still provides all of the benefits that users have come to expect from a traditional noise dosimeter. Fully featured and able to satisfy all current noise at work measurement protocols during a single run the CEL-350 will be an ideal instrument for experienced and new user of dosimeters in the workplace. No setup to worry about since the unit stores all results for later investigation and reporting however required.

The CEL-350 dBadge is priced as an individual instrument.  The CEL-350/K1 kit includes: charger, infrared-USB PC input cable, insight database software, power supply, acoustic calibrator, pin and aligator clothing clips and a carrying case,

 

  • Lightweight less than 2.4 oz
  • Small size only 2.8 in long and 1.7 in wide and 2.0 in tall
  • Quick battery recharge in less than 90 mins from completely empty
  • Stores everything for later review
  • Calculates all the popular noise dose parameters
  • Time history profiling of 4 results at fixed 1 m intervals
  • Wide dynamic range from 65 to a full 140 dB
  • Measures simultaneously 3 dB and 5 dB exchange rate
  • Lockable for security
  • Direct automatic calibration with standard acoustic calibrator with 1/2′ cavity

 

The CEL-352IS dBadge micro dosimeter is designed to satisfy all current workplace noise protocol methods for the collection of personal noise data. Careful attention to the requirements of US noise dosimetry methodologies provides for the simultaneous storage for the noise levels in such a way that the dose values can be obtained with both the widely used exchange rates (or Q factor) using the 3 and 5 dB doubling rates. This means that a single measurement run can be taken and the noise levels assessed to both the OSHA and NIOSH legislation. Four time history profiles are saved with the Q=3 and Q=5 time average value plus the C and the Z peak levels. The dosimeter calculates and displays the % noise dose value plus the Lavg for the run. The CEL-352IS will be an ideal unit for industrial hygienists or company safety officers charged with monitoring the noise exposure of workers particularly in situations where a conventional noise dosimeter with a remote cable microphone might not be the most convenient method.

 

Acoustic accuracy: ANSI S1.25, IEC61252 2002 Personal sound exposure meters
Dynamic range (dB): 65 to 140
Frequency weightings: A for rms values plus Z and C for peak measurements
Time weightings: Slow for Q=5 data plus non for Q=3 data as required for standards
Exchange rate (Q dB): 5 and 3 simultaneously
Threshold level (dB): Any levels from 70 to 90 in 1 dB steps
Criterion level (dB): Any level between 70 and 90 in 1 dB steps
Weight (oz, g): <2.4 oz (68 g)
Size (in, mm): <2.8 x 1.7 x 2.0 in (72 x 42 x 52 mm)
Battery life (hr): 32 hours continuous, unit gives expected remaining battery life in hours when switched on by “fuel gauge” display icon
Memory storage (results): At least 180 hours at 4 profiles every minute with unit showing remaining memory recording time in hours when switched on

Product Manual (PDF)
Specifications (PDF)