Miller 400D Soil Resistivity Meter Rental

Rent Miller 400D Soil Resistivity Testing

  • Resistance readings with the push of a button
  • Integrates with Bluetooth-enabled PCs and PDAs for wireless data acquisition
  • Soil resistivity testing survey software included

 

  • No need to select ranges or adjust dials – the Miller 400D provides a direct read-out of resistance with the push of a button
  • Bluetooth interface allows optional data-logging via a Bluetooth-enabled PC (or PDA)**
  • Rugged, hard plastic case – safe to use on wet ground – IP67 rating for dust and water intrusion
  • High resolution digital display
  • Resistance measurements are unaffected by any stray interference signals that may be present in the earth during readings, due to the use of narrow band-pass filters centered at 82.2Hz (the unit’s operating frequency)
  • Runs on a set of replaceable D-cell alkaline batteries…no need to periodically recharge the unit or to plug it into a power source
  • Performs 10,000 single readings on a fresh set of batteries
  • Integrates with Universal Rectifiers’ Soil Depth Selector/Multi-Pin Cable Harness System
  • Resistance measurement range from 0.01Ω to 10MΩ (auto-ranging)
  • Accuracy: 
    0.01Ω to 1MΩ range: ±1.6% ±1LS Display Digit ±0.01Ω
    1MΩ to 10MΩ range*: ±5% ±1LS Display Digit
  • Storage temperature range (with batteries installed): -40°C to 50°C (-40°F to 122°F)
    Operating temperature range: -20°C to 54°C (-4°F to 129°F)
  • Dimensions: 12 W x 10.5 L x 5.75 H (30.5cm x 26.7cm x 14.6cm)
  • Weight: 8.6 lbs (3.9kg)

Product Manual (PDF)
Specifications (PDF)