Rent In-Situ SmarTroll multiparameter qater quality monitor

Rent In-Situ SmarTROLL Multiparameter Meter

Hold the future of water quality monitoring in your hand.  The SmarTROLL Multiparameter (MP) Handheld combines industry-leading water quality sensors with revolutionary smartphone mobility.  The intuitive iSitu® Application eliminates training time and runs on your iPhone®, iPod touch®, or iPad® device.  The SmarTROLL MP simultaneously measures 14 parameters:

  • Chemical parameters: Dissolved oxygen (optical sensor), conductivity (actual and specific), pH, ORP, salinity, total dissolved solids, resistivity, and density
  • Physical parameters: Air and water temperature, barometric pressure, water level, and water pressure

Simply connect the SmarTroll MP Probe to a battery pack, launch the iSitu App, and start reading results.  No warm-up time or tedious setup.  The iSitu App guides you through spot checks, calibrations, and data management.

  • Use the SmarTROLL MP System anywhere:  Reduce field equipment requirements for routine monitoring and low-flow sampling events.
  • Instantly collaborate with colleagues:  Use a wired or wireless connection to send real-time snapshots of data.
  • Streamline data management:  Consolidate all site information on your smartphone and tag data with site photos and GPS coordinates.  Log data to your smartphone and download results in a standard file format
  • Eliminate errors:  Smart sensors automatically recognize calibration solutions, store calibration data in the sensors, and perform diagnostics.  Start monitoring immediately.  Sensors are pre-calibrated at the factory with NIST®-traceable standards (where applicable).
  • Reduce maintenance:  Robust sensors stand up to field use and calibrations can last for months.
  • Get accurate results: Internal logic automatically compensates measurements for barometric pressure and salinity.  

 

  • Ambient water quality spot checking
  • Low-flow groundwater sampling
  • Mine water monitoring
  • Stormwater management
  • Vertical profiling

 

Standard Sensors Accuracy Range Resolution
Level, Depth, Pressure Typical +/-0.1% FS @ 15°C; +/-0.3% FS max. from 0 to 50° C 76 m (250 ft); absolute (non-vented) +/-0.01% FS or better
Barometric pressure (battery pack) +/-3 mbar max. 300 to 1100 mbar 0.01 mbar
Conductivity Typical +/-0.5% + 1µS/cm; +/-1% max. 5 to 100,000µS/cm 0.1 µS/cm
Dissolved oxygen
Optical RDO Fast Cap
+/-0.1 mg/L
+/-0.2 mg/L
+/-10% of reading

0 to 8 mg/L
8 to 20 mg/L
20 to 50 mg/L

Full operating range: 0 to 50 mg/L

0.01 mg/L
ORP +/-5.0mV +/-1400 mV 0.1 mV
pH +/-0.1 pH unit (0-12 pH) 0 to 14 pH units 0.01 pH unit
Temp., air (battery pack) +/-2°C -20 to 70°C
(-4 to 158° F)
0.1°C
Temp., sample (probe) +/-0.1°C -5 to 50°C
(23 to 122°F)
0.01° C or better

 

Product Manual Android(PDF)
Product Manual IOS(PDF)
Specifications (PDF)